Skip to content
BadenLock Services
Open 24/7(226) 894-0179Open 24/7
Hands holding a lock cylinder and a ring of keys above a worn workbench with another cylinder and loose keys. — Lock Rekeying, Petersburg
Technician using a screwdriver on the deadbolt of an open blue-gray front door, with a tool bag and screw tray nearby. — Deadbolt Installation, Petersburg

Change or rekey · Petersburg

Lock Rekeying in Petersburg

The builder handed over your new home with a stack of identical keys, and you know the framing crew, the painters and the flooring installers all used a construction key during the build.

Call (226) 894-0179

In plain words

A rekeying visit follows a straightforward order. First the locksmith confirms you are entitled to change the locks, which for an owner is identification and for a tenant includes the landlord's agreement. Next comes a walk around the house to list every door to include, read the keyway on each cylinder and check its condition. The cylinders come out one at a time, are pinned to the new key and go back in. Every door is then tested with the new key and with the old one, spares are cut and tried in each lock, and you receive a note of what was done.

Sound familiar?

The builder handed over your new home with a stack of identical keys, and you know the framing crew, the painters and the flooring installers all used a construction key during the build. The doors are brand new, but the key that opens them should be yours alone.

How the visit goes

Inside the lock

What a rekey changes

A deadbolt: the round exterior cylinder with its keyway, the latch and the bolt
  1. A deadbolt seen from the outside: the cylinder, the latch and the bolt

    01

    The lock you already have

  2. The same deadbolt with the housing cut away to show the cylinder and its plug

    02

    Inside the cylinder

  3. Cutaway of the cylinder: springs and top pins above the shear line, bottom pins in the plug

    03

    Pins, springs and the shear line

  4. A new key in the cutaway cylinder, with every pin meeting at the shear line

    04

    A new key, new pins

Lock Rekeying

How the visit goes

Technician kneeling with a yellow cordless drill at the latch plate of a black door, a tool bag on the porch. — Petersburg
Roll-up black cloth pouch lying open on a worn wooden bench, holding thin metal probes and hooked tools in separate pockets. — Petersburg
  1. The condition of every cylinder

    A cylinder about to be pinned to a new key should be worth pinning. The locksmith turns the existing key in each lock and feels for a plug that drags, soft springs, a wobbling cam or a keyway packed with grit and old oil. A cylinder in good order is rekeyed as it is. A worn one is cleaned and given fresh springs while it is apart, and one that has truly worn out is pointed out so you can choose a replacement rather than have new pins dropped into a tired lock. A bolt that binds against its strike gets noticed here too, so the strike can be adjusted while the locksmith is at the door.

  2. When a cylinder is swapped instead of repinned

    Sometimes the right move for a particular door is a new cylinder rather than new pins, and the locksmith says so before doing it. A cylinder with a keyway that cannot join the household key is replaced with one that can. A plug that has worn oval, springs that have collapsed, or a cylinder someone has already drilled is replaced because fresh pins would not fix its feel. In each case the replacement is pinned to the same new key as the rest of the house, so the swap is invisible in daily use. The old cylinder is handed to you or taken away as you prefer.

  3. Looking after a freshly pinned cylinder

    A cylinder that has just been rekeyed turns as smoothly as it ever will, and a little care keeps it that way. Once or twice a year, a puff of whatever lubricant the cylinder maker specifies into the keyway and a few turns of the key is all it needs, since some current cylinders use oil while too much graphite can itself gum a cylinder. When you need more copies, cut them from one of the locksmith's originals rather than from a copy, because each generation drifts a little from the true depths. A key that starts to need a jiggle is the cylinder asking for a clean and a new key, not a sign of anything serious.

Lock Rekeying

In the van

  • Key tags and keying record

  • Pinning tweezers and tray

  • Replacement cylinder for odd keyways

  • Reset tool for user-rekeyable cylinders

  • Code cutter or key duplicator

Technician in a brown cap using a yellow cordless drill at the lockset plate of a navy door beside gray-blue siding. — Petersburg

Lock Rekeying

What affects the quote

  1. How many cylinders are included

    Each cylinder is removed, pinned and tested on its own, so a single deadbolt and a house with six exterior locks plus a shed and a gate are very different visits, and the quote follows the count.

  2. Number of keys cut

    Keys are cut and tested individually, so the total depends on how many the household or the tenants need. Say the number when you book and the quote reflects it from the start.

  3. Mismatched keyways needing a cylinder swap

    Where one door's cylinder cannot take the key the other doors share, a compatible replacement cylinder is fitted and pinned to match, and that hardware appears as its own line in the quote.

What to have ready

  • Do you own the home, rent it, or manage it for someone else?
  • How many new keys will your household or your tenants need?
  • Is there a basement suite or office that should keep its own key?
Call (226) 894-0179

Lock Rekeying: questions

Questions
Can the entry door of my condo suite be rekeyed?

Often, but check with your property management first. Condominium corporations have a right to enter a unit on reasonable notice, and without notice in an emergency, and many buildings ask that suite doors stay on a system the corporation can open or that a key be lodged with management. Lobby, garage and locker-room doors belong to the corporation and are theirs to manage. A locksmith will ask about your building's rule and work within it.

I rent. Can I have my locks rekeyed?

Yes, with your landlord's agreement, which is what the tenancy rules here expect before a tenant changes a lock. Most landlords are glad to consent when a key has gone missing or a former roommate has moved out, and the locksmith will want to hear that the landlord knows and will be holding one of the new keys. The rekey itself runs the same as for an owner, and a short note listing the doors done is handy to pass to the landlord.

My house is older and has a mortise lock. Can that be rekeyed?

Yes. A mortise lock, the kind with a large case set into the edge of the door, uses a threaded cylinder held by a set screw reached from the door's edge. The cylinder unthreads, is pinned like any other and screws back in. Where a very old lock uses a bit key or a lever mechanism instead of a pin cylinder, the locksmith will explain the options, which may include fitting a modern cylinder into the existing case so the door keeps its original hardware.

Related services

Lock Rekeying near you

Call(226) 894-0179

Request a visit

Or call (226) 894-0179 · open 24/7